Procedure for automated Eddy Current crack detection in thin titanium plates /

Procedure for automated Eddy Current crack detection in thin titanium plates /

Show other versions (1)

Bibliographic Details
Main Author:	Wincheski, Russell, A. (Author)
Format:	Government Document Book
Language:	English
Published:	Hampton, Virginia : National Aeronautics and Space Administration, Langley Research Center, 2012
Series:	NASA technical memorandum ; 2012-217782
Subjects:	Detection Eddy currents Image processing Metal plates Surface cracks Thin plates Titanium

Similar Items

Procedure for automated Eddy Current crack detection in thin titanium plates /
by: Wincheski, Russell A.
Published: (2012)

Fatigue crack growth characteristics of thin sheet titanium alloy Ti 6-2-2-2-2
by: Smith, Stephen W
Published: (2001)

Aqueous chloride stress corrosion cracking of titanium : a comparison with environmental hydrogen embrittlement /
by: Nelson, Howard G.
Published: (1973)

The surface crack problem in an orthotropic plate under bending and tension
by: Wu, Bing-Hua
Published: (1986)

The surface crack problem in an orthotropic plate under bending and tension
by: Wu, Bing-Hua
Published: (1986)

The surface crack problem in an orthotropic plate under bending and tension /
by: Wu, Bing-Hua, et al.
Published: (1986)

Fatigue crack growth characteristics of thin sheet titanium alloy Ti 6-2-2-2-2 /
by: Smith, Stephen W, et al.
Published: (2001)

Mitigation of crack damage in metallic materials /
by: Leser, Patrick, E.
Published: (2014)

Fracture testing of 2324-T39 aluminum alloy
by: Dawicke, D. S
Published: (1995)

The effect of O₂, H₂O, and N₂ on the fatigue crack growth behavior of an α + β titanium alloy at 24C̊ and 177C̊
by: Smith, Stephen W
Published: (2001)

The effect of O₂, H₂O, and N₂ on the fatigue crack growth behavior of an α + β titanium alloy at 24C̊ and 177C̊ /
by: Smith, Stephen W, et al.
Published: (2001)

A clamped rectangular plate containing a crack
by: Tang, Renji
Published: (1985)

Mitigation of crack damage in metallic materials /
by: Leser, Patrick E.
Published: (2014)

Electron beam freeform fabrication of titanium alloy gradient structures /
by: Brice, Craig A.
Published: (2014)

Electron beam freeform fabrication of titanium alloy gradient structures /
by: Brice, Craig A.
Published: (2014)

Surface cracks in a plate of finite width under tension or bending
by: Erdogan, F (Fazil)
Published: (1984)

Matrix fatigue crack development in a notched continuous fiber SCS-6/Ti-15-3 composite
by: Hillberry, B. M
Published: (1990)

Periodic overload and transport spectrum fatigue crack growth tests of Ti62222STA and Al2024T3 sheet
by: Phillips, Edward P
Published: (1999)

Titanium honeycomb panel testing /
by: Richards, W. Lance
Published: (1996)

Small deflection of a class of clamped thin plates using conformal mapping /
by: Worley, Will J, et al.
Published: (1970)

Effect of initial hydrogen content of a titanium alloy on susceptibility to hot-salt stress-corrosion /
by: Gray, Hugh R
Published: (1971)

Method for the production of strongly adhesive metal films on titanium and titanium alloys with a metallization process [microform] /
by: Hahn, H.-J
Published: (1986)

Failure assessment diagram for titanium brazed joints /
Published: (2011)

A clamped rectangular plate containing a crack /
by: Tang, Renji, et al.
Published: (1985)

Technique for measuring the dielectic constant of thin materials
by: Saraband, K
Published: (1988)

Surface characterization of hydrogen charged and uncharged alph-2 and gamma titanium aluminide alloys using AES and REELS /
by: Shanabarger, M. R (Mickey Rock), 1939-, et al.
Published: (1990)

Surface characterization of hydrogen charged and uncharged alph-2 and gamma titanium aluminide alloys using AES and REELS
by: Shanabarger, M. R
Published: (1990)

Electromagnetic scattering from a polygonal thin metallic plate using quadrilateral meshing
by: Deshpande, M. D
Published: (2003)

Electromagnetic scattering from a polygonal thin metallic plate using quadrilateral meshing
by: Deshpande, M. D
Published: (2003)

Electromagnetic scattering from a polygonal thin metallic plate using quadrilateral meshing /
by: Deshpande, M. D, et al.
Published: (2003)

Effects of long-term thermal exposure on commercially pure titanium grade 2 elevated-temperature tensile properties /
by: Ellis, David L., et al.
Published: (2012)

Fracture surface analysis in composite and titanium bonding annual report /
by: DeVilbiss, T. A
Published: (1986)

Titanium optics for ion thrusters /
Published: (1999)

The effect of composition on the mechanism of stress-corrosion cracking of titanium alloys in N2O4, and aqueous and hot-salt environments /
Published: (1970)

Titanium optics for ion thrusters /
by: Soulas, George C (George Chris), 1966-, et al.
Published: (1999)

Fatigue crack growth study of SCS₆/Ti-15-3 composite /
by: Kantzos, Peter, et al.
Published: (1989)

Fatigue crack growth study of SCS₆/Ti-15-3 composite
by: Kantzos, Peter
Published: (1989)

Fatigue crack growth study of SCS₆/Ti-15-3 composite
by: Kantzos, Peter
Published: (1989)

Fatigue crack growth study of SCS₆/Ti-15-3 composite
by: Kantzos, Peter
Published: (1989)

Re-design and fabrication of titanium multi-wall thermal protection system (TPS) test panels
by: Blair, W
Published: (1984)